1.Brief introduction of CX-HUFM-TDS-100H Handable ultrasonic flowmeter
1.Widely used to measure liquid flow in various industries
2.Smart body, high accuracy, good repeatability,long-running cell,easy operation,built-in printer etc.
3.Very popular in industry like petrochemical, water, power, energy monitoring etc. It's
4.Exported to Japan, Korea, Australia, America etc.
 
Main features
1.Accuracy:±1%
2.Repeatability:±0.2%
3.Easy to install outside the pipe
4.Four line display: Instantaneous flow rate,Accumulate flow,status
5.Standard interface RS232 for data output and on-line operation
6.Self-diagnose to show the current status
7.Built-in Nickel-hydrogen cell supports 10 hours of operation

2.Main features of CX-UFM-TDS-100M Ultrasonic Modular Flowmeter
1.It can work alone without a LCD and keypad module
2.no pressure drop, no moving parts, no leaks and no contamination
3.Integrate the modules into a multi-channel flow meter then can measures several dozen of different pipes
4.Higher accuracy by measures the same pipe with all the channels
5.Easy to install it and don't need special skills or tools
 
Technical parameters
Note:The memory will be kept in case of power lost



3.Main features of CX-UFM-TDS-100P portable type ultrasonic flowmeter
1.Easy to install outside the pipe
2.High accuracy ±1%, good repeatability:±0.2%
3.Long-running cell,easy operation,built-in printer etc
4.two lines display: Instantaneous flow rate,Accumulate flow,status
5.Built-in printer,to print in time and regularly
6.Standard interface RS485 for data output and on-line operation
7.Self-diagnose to show the current status
8.Built-in Nickel-hydrogen cell supports 20 hours of operation
 
Technical parameters


4.Brief introduction of CX-UWM-TDS-100W  Ultrasonic water meter
1.Designed according to Europe alliance EN1434 standard and ultrasonic time-difference principle
2.Ultrasonic time-difference principle Measuring water or other liquid
3.High accuracy, better reliable, no moving part, no need to set data. Install in any angle
4.It can instead of other water meter
 
Main features
1. Accuracy: ±1%,± 2%,Repeatability: ±0.5%
2.Measurement cycle: Default for 3S, 1~31S should be optional by the user
3.Battery can work 6-10years, or two line power
4.Lowest measuring velocity of liquid 0.01m/s
5.No pressure lost and moving parts, no nursing for 10 years
6.Pipe length designing according to the normal water meter
7.IP68, can working under water lower than 2 meters
8.Foundry in mould, no leakage
9.Ceramic sensor apply to -40ºC~160ºC
10.Over look type, normal type, separate type
 
Technical parameters